July 3, 2022
How to Fit Roller Blinds

There are several ways to fit your Fit Roller Blinds. The most common way is to measure the window and cut the blind accordingly. If you want a perfect fit, use a cutting mat or straight edge as an extension of the top of the window.You can also use a pencil and ruler to find the correct width before cutting your Fit Roller Blinds.

If you’re working with a pre-cut blind, simply pull until it goes over the top of the window and then pull down on each end until it’s tight against the wall. This will create tension in the material so that when you take off one side of the roller, it won’t sag when you roll up that side.

Why measure for roller blinds

One of the big advantages of Fit Roller Blinds is that you can move them where you want them. The choice is yours. It’s very easy to move a roller blind around if you want to change the positioning of the blinds. The numbers below tell you how wide you need to cut each section of blind.

How to cut roller blinds

Follow these steps to make cutting your Fit Roller Blinds as easy as possible.

Step 1: Make a template of your desired blind size and cut it out with a jigsaw. Or, if you prefer, make a jigsaw template of your window and your blind.

Step 2: Remove the window trim from around the blind. If you’re making a blind with a folding rod, remove the rod’s frame.

Step 3: Cut the blinds to the dimensions of the frame with your jigsaw. Take it easy when cutting the blinds because the blinds are fairly heavy and they will be difficult to manipulate when finished. Also, use a light touch when cutting the Fit Roller Blinds.

Step 4: Remove the blinds from the jigsaw and trim them to the length you want using a jigsaw or utility knife.

Step 5: Tape the blinds together and cut two pieces from the corner to the bottom.

How to fit roller blinds with a pre-cut

This method is often easier, especially if you have pre-cut blinds. You’ll still need to find the correct width, but the Fit Roller Blinds should be close to the window and fit tight.Using a straight edge or pencil, measure the window and draw lines with your ruler on the blinds.Cut the blinds to these lines, then gently pull the seam open and out until it’s tight against the wall.

Your Fit Roller Blinds should now fit tight against the wall. If you want a perfect fit, use a cutting mat or straight edge as an extension of the top of the window.If you’re working with a pre-cut blind, simply pull until it goes over the top of the window and then pull down on each end until it’s tight against the wall.

How to fit roller blinds with a custom cut

If you want a custom cut, you will need a table saw and one or more dremel tools.First cut one side of the Fit Roller Blinds at a 45 degree angle to the wall. Use a tape measure to keep things accurate.This will make it easier to match the piece to the roller as you roll up the other side.

A straight edge will help you make straight cuts from one corner to another.Continue cutting until both sides are cut from the corner to the center.Pin in place all sides with minimal crease.The crease is what creates the custom fit of the Fit Roller Blinds It’s also where the two pieces meet.

Conclusion

Hopefully, this article will give you a better idea about how to fit blinds to your windows and help you to make better decisions for your property. By following the steps described above you will be able to create an elegant and functional look that will last for years.

We have over 13 years experience in installing Blinds and can help you to take the right measurements and help you create your perfect blinds. We also have a large inventory of easy fitting blinds and shades.

Leave a Reply

Your email address will not be published.